how to install analog to digital converter box

If the local television signals are weak, you may need a stronger antenna or even an external roof-mounted antenna. Make sure you've selected the best antenna for your area. Using the method described in the previous section, try repositioning your antenna and pointing it in the correct direction if you have a directional antenna.

Connect to the input marked antenna-in if you see such a label, or the number one input if they are numbered. Some TVs have both an input and an output, and some have two inputs. Make sure the connection is tight, and check the label of the coaxial connector on your TV. Since, ADC is configured to trigger based on external event, the ADC conversions are read in DMA2Stream 0 transfer complete interrupt to capture as and when conversions are ready. Check to verify the antenna is connected correctly. Configure Analog to Digital Converter block to Read results only trigger mode as ADC1 is configured to start conversion on external event source.Make sure it's set to antenna, and search again. If you search for channels in cable mode, your television won't find any digital OTA channels. Make sure your TV is set to use your antenna.

Look for the letters DTV or words like 'digital-ready.' If your television was made before 2006, it's probably analog, in which case you'll need a converter box.

Make sure you have a digital television. Introducing NCD’s IoT Wireless Analog to Digital Converter (ADC), boasting up to a 28 Mile range using a 900MHz wireless mesh networking architecture or 1 Mile using 2.

How to install analog to digital converter box